product description
Beautiful, first-class crafted seat for the Scrambler conversion.
The base frame is deep-drawn from thermoplastic material.
Therefore, it is not as torsionally rigid as, for example, GRP.
In return, experience shows that discussions with the examiner about
Strength and fracture behavior.
The bench is suitable for 2-person use.
Color
- Artificial leather: brown
- Seams: brown
This seat is suitable for many BMW 2-valve engines, e.g.:
- R45
- R65
- R75
- R80
- R100
Please compare the dimensions before purchasing!
Dimensions
- Total length: approx. 690mm
- Width at the front: approx. 210mm (measured on the inside)
- Length of seat: approx. 645mm
- max. width (middle): approx. 270mm (measured on the inside)
- Further dimensions available on request.
Assembly
For installation, the fender must be removed or modified as it is located between
the frame tubes too high. The fastening points must also be individually
We recommend using a bench base plate for mounting
the bench.
You can find these in our shop under the following article numbers:
Seat base plates | |
made of thermoplastic | |
610x330x10mm | SB-RET |
450x250x8mm | SB-UPB |
700x300x10mm | SB FET |
made of aluminium | |
500x300x4mm | SB-ALKX |
600x300x4mm | SB-ALK |
You can find tips and tricks for assembling a bench here
on www.kickstarterblog.de under "TIPS".
IMPORTANT NOTE
Please note that we only accept returned, unsuitable goods
fully refund without damage .
Therefore, please make sure that the seat is placed on the frame
not to damage it (e.g. by sharp-edged frame parts or by sitting on
without professional installation). Thank you very much!
